[classicsmok]

I am looking for alphacam postprocessor for any morbidelli machine.
It would be great if you can help.

[camboy]

hello,
i sell posts from time to time for alphacam.
i have tria 6000,7500, esa/gv, 504/503stc
let me know and we can work something out!
regards
p

[classicsmok]

504 or 503 will be ok.

[artan]

hello,
i sell posts from time to time for alphacam.
i have tria 6000,7500, esa/gv, 504/503stc
let me know and we can work something out!
regards
p

Hi,I need post processor for alphacam.
Could we make contact about the post processor?
I have Morbidelli Author 504.
Waiting for your response.

[num1040]

Hi all.
Is there anyone who can tell me if you can use G code X Y Z generatet from PC then transfered to the CNC by floppy disk?

example would be nice

I ask because right now we program directly on the CNC point to point and we use autocad to get the point to points and then punch them in manualy and some of the programs are very very long so it would be good to have a program where you can import the autocad drawing and generate the X Y Z and just copy it to a floppy disk and load it as a SUB program.
Any ideas is helpful guys.

Best regards
Flemming

[neptunet]

Hello, I also need a post processor for Morbidelli Author 503. Did you found it? Thanks

[jasmin_morbidelli]

Hello all,
i have post for Morbidelli for ALPHACAM contact: [email protected]