584,829 active members*
5,330 visitors online*
Register for free
Login

Thread: hyundai 18s

Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2011
    Posts
    0

    hyundai 18s

    I have to rebuild my turret on hyundai 18s.
    are there any parts available out there and where do
    I buy them?? and what do i need?
    any direction is appreciated.

    TONY

  2. #2
    Join Date
    Aug 2008
    Posts
    93
    I cleaned mine , that's all I ever did so far. Bought some 8mm taper pins and an 8mm taper pin reamer from McMaster just in case I ever need them. Don't think I can offer any more help sorry.

Similar Threads

  1. Tool Turret Fault Alarm on TL-1 with no Turret?
    By Edster in forum Haas Lathes
    Replies: 10
    Last Post: 02-08-2010, 03:35 PM
  2. Turret in Wrong position
    By chipsahoy in forum Fanuc
    Replies: 4
    Last Post: 01-20-2010, 02:13 AM
  3. Replies: 1
    Last Post: 10-05-2009, 04:32 PM
  4. Reversing turret tool position
    By motter71 in forum G-Code Programing
    Replies: 5
    Last Post: 09-26-2007, 02:57 AM
  5. Miyano bnc 34t main turret not locking into position
    By CJ Machine in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 05-25-2005, 10:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •