Hello all,
The machine in question is a Makino A81 with the Pro 3 control. All of our cnc machines are connected with a dnc system for program and tool offset transfer. Apparently no one in the shop can figure out how to download or upload the tool offsets from the Makino (program transfers are no problem).
Can anyone here give a quick tutorial on how to transfer tool offsets for this machine? Any help will be greatly appreciated.
-Diedesigner
Results 1 to 2 of 2
-
12-12-2011, 05:42 PM #1
Registered
- Join Date
- May 2010
- Posts
- 0
download/upload tool offsets with Makino Pro 3
-
01-25-2012, 10:43 AM #2
Registered
- Join Date
- Sep 2011
- Posts
- 0
You can send tool offset like a program format.
Use code G10-data input.
Example:
Tool offset for T1
G10 G90 L10 P1 R150 (TOOL LENGHT)
G10 G90 L12 P1 R10 (TOOL RADIUS)
Send program to machine,and start program.
Reply With QuoteSimilar Threads
-
panarobo upload/download software
By 323ci in forum RC Robotics and Autonomous RobotsReplies: 12Last Post: 01-09-2024, 06:14 PM -
Can download from, but cant upload to Fanuc OM or OT
By laka in forum FanucReplies: 14Last Post: 10-09-2011, 12:21 PM -
Can Download but Not Upload??
By amf1277 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 07-01-2010, 04:00 PM -
Mazak M32 Comms Upload-Download
By Mr_Carpyman in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 07-25-2006, 07:50 PM -
Fanuc 18i Comms Download & Upload
By Mr_Carpyman in forum FanucReplies: 2Last Post: 06-26-2006, 07:14 PM
Posting Permissions
