Hi, I am really new here!
Please... may some of you help me to calibrate my homemade machine?
Next is what I have:
X Axis (2 Motors)
2- 1/2"-10 Acme Threaded Rod, 1/2" Travel/Turn, Right-Hand Thread, 5 Starts
2- HT23-280-8 Stepper Motor, 280 Ozln, 1.8 deg/200 Steps/Rev
2- SideSteps Drivers (Full, 1/2, 1/4, & 8th microstepping Resolution)
Y axis
- 3/8"-12 Acme Threaded Rod, Right-Hand Thread, 1 Start
- HT23-400-8 Stepper Motor, 400 Ozln, 1.8 deg/200 Steps/Rev
- SideSteps Drivers (Full, 1/2, 1/4, & 8th microstepping Resolution)
Z axis
- 3/8"-12 Acme Threaded Rod, Right-Hand Thread, 1 Start
- HT23-400-8 Stepper Motor, 400 Ozln, 1.8 deg/200 Steps/Rev
- SideSteps Drivers (Full, 1/2, 1/4, & 8th microstepping Resolution)
Questions:
1.- Motor Tuning Configuration for each. ?
2.- Whats the best Microstepping Resolution for each?
I will really apreciate your help, thanks!
Frank