Hi guys, I have a slight problem with a part we make. Machine is a Makino a61, the part is a stator vane that is located in the middle of the B axis, tool 1/2 ball nose. Any who I program the part in a zig fashion, where the mill starts at the top of work piece and spirals down. The problem is before I can get to the bottom the control alarms out cause by b axis movements are greater than 99,999*. Speed and finish are critical. I can't use zig-zag because customer is very picky, not to mention it is a little slower. Is there a remedy in surfcam or?
Oh machine control is makino professional 5.
Thanks,
Wolf