Hi All, I am currently setting up Technology Assistant for all Inserts/Materials and have realised that say if i create a tool in the toolstore eg,
PCLNR 2525 M12 (This tool could possibly have 3 different inserts used with it)
0.4mm Rad
0.8mm Rad
1.2mm Rad
Do i create the tool 3 times for each different insert eg
PCLNR 2525 M12 -with 0.4mm rad
PCLNR 2525 M12 -with 0.8mm rad
PCLNR 2525 M12 -with 1.2mm rad
As the tool nose radius is stored within the tool geometry and when an insert is selected through the technology tab , regardless of what nose radius the insert has the actual nose radius value is not changed ?
Thanks Matt