Hello All, has anyone here been able to figure out how to cut an internal oil groove on Mazak 650 lathe with Nexus controller? Mazak said it couldnt be done on the T-2/3 and you can..but cant cheat the new one..or havent found a way as of yet. Any help would be appreciated.
KEV :drowning:
Results 1 to 3 of 3
-
11-11-2005, 05:31 AM #1
Registered
- Join Date
- Aug 2005
- Posts
- 3
Turning Internal(Figure 8) oil grooves on new Mazak
-
11-13-2005, 12:16 AM #2
Registered
- Join Date
- Jul 2004
- Posts
- 93
Just a guess.
how about an eia program , not mazatrol?
BradIF ITS NOT BROKE YOUR NOT TRYING HARD ENOUGH
Ashes to ashes , dust to dust , If it wasnt for Harleys the fast lane would rust.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
04-05-2006, 12:53 AM #3
Registered
- Join Date
- Mar 2006
- Posts
- 10
i cant see any reason why the machine shouldnt be capable, they must be referring to the mazatrols software capabilities. like he said an eia/iso program is the way to go. code it or cam it.
Reply With Quote
Posting Permissions
