584,337 active members*
6,401 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Vectric > VCarve Pro - Roughing and Re-Roughing
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2009
    Posts
    5516

    VCarve Pro - Roughing and Re-Roughing

    Here's a dilemna: You have a sign, for example, with a large field, and raised letters in an intricate font or artwork (a pocket with intricate islands). To get the best surface for the field you'd like to use the largest straight bit possible, say 1/2". The problem is, your final pass with your fine bit, say 1/16", would take forever because the 1/2" bit leaves a lot behind. You could use a 1//4" or 1/8" bit to do the clearance pass, but that would take forever too. How do you resolve this?

    I discovered a cool trick. In the above example using the pocketing toolpaths, select 1/4" as your finish tool, and 1/2" as your clearance tool.

    Now, do the same thing, instead select 1/16" as your finish tool, and 1/4" as your clearance tool. Then just delete the 1/4" toolpath that was just created.

    In this way, the first operation would be the 'rough' and 're-rough', and the last operation would do all the detail work. It's an extra tool change, but in many cases this would be way faster than using a small tool for clearance.

    This also works in Cut3D as well... saves a heluva lot of machine time!

  2. #2
    Join Date
    Jan 2009
    Posts
    68
    Quote Originally Posted by louieatienza View Post

    No.. saves a heluva lot of machine time!
    A most valuable tip.
    Thanks, Louie.

  3. #3
    Join Date
    Nov 2010
    Posts
    71
    I use VCarve Pro and love it. I can't imagine carving signs without it. That is a great idea! I'll have to give that a try.
    Mike Kearns
    mikeswoodsigns.com

Similar Threads

  1. Need help with G68 roughing cycle.
    By g-codeguy in forum Fagor Automation
    Replies: 2
    Last Post: 02-13-2012, 05:18 PM
  2. Turning roughing
    By pinguS in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 0
    Last Post: 11-23-2009, 11:49 PM
  3. 3-D roughing
    By mars13 in forum Surfcam
    Replies: 4
    Last Post: 05-23-2009, 11:38 PM
  4. Roughing Steel
    By Alex Westling in forum MetalWork Discussion
    Replies: 7
    Last Post: 06-12-2008, 04:08 PM
  5. Roughing program
    By blmmdes in forum Hypermill
    Replies: 2
    Last Post: 04-22-2008, 04:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •