584,841 active members*
4,608 visitors online*
Register for free
Login
IndustryArena Forum > Events, Product Announcements Etc > Polls > Making the transition from Yasnac I80 control to Yasnac J300 control?
Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2008
    Posts
    4

    Making the transition from Yasnac I80 control to Yasnac J300 control?

    Our company is looking into buying a new Matsuura machine which is equipped with the J300 control. Our current machines have the Yasnac I-80. How similar is the J300 control to the older I-80? The panel layout looks very similar from looking at the pictures. My concern is the navigation inside the control.

  2. #2
    Join Date
    Feb 2009
    Posts
    6028
    A new machine with a J300???? thought that was like a 15+ year old control...
    All the new Matsuura's I see are Fanuc controls..

  3. #3
    Join Date
    Jun 2008
    Posts
    4
    The technical specs I have on the machine ( RA4G ) specifies Masuura Systems J300 control. I assumed it was still a Yasnac based system.

  4. #4
    Join Date
    Feb 2009
    Posts
    6028
    On the Matsuura web site, they don't list that model machine (old stock?)
    all the machines either have a Fanuc 30i or a Seimens 840Di (yuk)

  5. #5
    Join Date
    Jun 2008
    Posts
    4
    I just found out these machines have been discontinued. Oh well, back to the drawing board. Thanks for all your input.

Similar Threads

  1. Need Help with Yasnac J300 controller! Alarm codes
    By drutort in forum DNC Problems and Solutions
    Replies: 7
    Last Post: 08-19-2021, 10:43 PM
  2. Can I use mach 3 to control my yasnac mx2?
    By Techbuilder in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 4
    Last Post: 04-14-2013, 06:04 PM
  3. Yasnac control
    By Jogren1 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 07-14-2011, 04:12 AM
  4. Dripfeeding Yasnac MX-2 Control
    By crlorenc in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 01-10-2010, 11:43 PM
  5. hitachi 20 sii with yasnac lx3 control
    By cnorris in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 09-11-2008, 02:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •