585,737 active members*
4,782 visitors online*
Register for free
Login

Thread: Taper macro

Results 1 to 3 of 3
  1. 02-16-2012, 07:27 AM #1
    Green Button
    Green Button is offline Registered
    Join Date
    Sep 2006
    Posts
    222

    Taper macro

    Tool: D63mm
    taper 5 degree, 90mm distance, end diameter 210mm

    I have been doing circular interpolation for this miller. Because radius changes all the time, it have to be done by small lines.
    Program is very long.

    Is there possibility to use some kind of macro?
    Reply With Quote Reply With Quote
  2. 02-17-2012, 12:24 AM #2
    zooloader
    zooloader is offline Registered
    Join Date
    Jun 2005
    Posts
    142
    you can use a simple subroutine with common variables to step out in dia and length for each revolution...
    Reply With Quote Reply With Quote
  3. 02-17-2012, 09:11 AM #3
    Green Button
    Green Button is offline Registered
    Join Date
    Sep 2006
    Posts
    222
    Thanks.
    I also found: A Taper Thread Milling Custom Macro : Modern Machine Shop
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Difference in Female Taper angle using Taper Cutter
    By Buntron in forum Material Machining Solutions
    Replies: 5
    Last Post: 06-07-2011, 06:53 AM
  2. Checking taper and gage-point using Fanuc Macro B
    By symbiosis in forum Parametric Programing
    Replies: 3
    Last Post: 11-01-2010, 07:00 AM
  3. NPT Taper-to-Straight-to-NPT-Taper Thread
    By bdyenter in forum MetalWork Discussion
    Replies: 2
    Last Post: 09-16-2009, 02:10 PM
  4. Macro Programming for Taper Bore machining
    By yaji63 in forum G-Code Programing
    Replies: 30
    Last Post: 05-22-2008, 04:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules