I need more help, I got a lot of help on my Clausing Mill to get it out of E-stop. I'm not sure how to link to that other thread, it has some background not sure it's related but I thought I should start a new thread on this one. If anybody can teach me how to link threads I'd appreciate it.
I am now out of e-stop and can jog the machine, but I can't get the spindle to come on. As I read the Dynapath manual shouldn't I be able to turn the spindle on manually when in jog mode?
I checked the PIC table and Spindle enable Word 9 Bit B is set to 0. When I check the schematic, with the motor slelector switch set to CCW I think I should get 24 volts at TB1-5. Does this make sense or am I misreading the schematic?
I replaced EEPROM 4201642 F with one I had that was marked Bad, maybe it was bad because of the spindle error.
Any and all help is appreciated.