584,805 active members*
5,276 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2009
    Posts
    7

    Need spares for a Calcomp 1023 Plotter

    Hi,

    I'm an Australian artist, working on an exhibition
    of drawings done with this old beast.

    It's crashing on start with a (bd) error,
    and I have replaced the x and y servos,
    the paper load servo, the voice coil unit,
    and that hasn't fixed it. If anyone can
    tell me how to fix it I'd be eternally grateful.

    If anyone has boards lying around I'm happy
    to pay you for them, and give you a couple
    of the drawings from the exhibition.

    It does a turret init, loads paper, seeks edges and then crashes.
    I spent $450 on pens, I really want to get this thing working!

    Best regards everyone!

    TomA1

  2. #2
    Join Date
    Aug 2009
    Posts
    7
    Still no luck with this....
    Anyone?

  3. #3
    Join Date
    Jul 2012
    Posts
    0

    Calcomp 1023

    Just dismantled a working calcomp 1023 plotter. All electronics and motors saved. Anyone interested?

    Reply to: [email protected]

Similar Threads

  1. Schematic for Calcomp 1023
    By zbigsm in forum Printing, Scanners, Vinyl cutting and Plotters
    Replies: 8
    Last Post: 01-18-2021, 02:06 PM
  2. Calcomp M81 Pen Plotter (IBM XY750)
    By cynar in forum Printing, Scanners, Vinyl cutting and Plotters
    Replies: 5
    Last Post: 12-10-2017, 03:49 PM
  3. Calcomp 1023 roller wheel replacement?
    By futurestack in forum Printing, Scanners, Vinyl cutting and Plotters
    Replies: 0
    Last Post: 10-22-2011, 08:21 PM
  4. Calcomp plotter stepper drives
    By Jim Estes in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 09-30-2007, 01:16 AM
  5. Calcomp 1041 plotter
    By Hobbiest in forum Printing, Scanners, Vinyl cutting and Plotters
    Replies: 3
    Last Post: 03-13-2005, 05:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •