Hopefully I can explain my problem without to much confusion. I am having trouble getting a 3d path to work. I am working from a raw forging I have a angle i need cut on one side of the part. I am able to get the angle programmed, my problem is that the top surface of the part is not to be machined, and my 3d cutter path is cutting into the top of my part. I posted a zip of the bbcd file. If anyone can help i would greatly appreciate it.
thank you
Thread: Having trouble with 3d on V24
Results 1 to 9 of 9
Threaded View
-
02-27-2012, 04:38 PM #1
Registered
- Join Date
- Jan 2009
- Posts
- 34
Having trouble with 3d on V24
Reply With QuoteSimilar Threads
-
I'm in trouble
By shook in forum FadalReplies: 0Last Post: 01-09-2012, 10:53 PM -
PLC trouble
By dipakkadam_619 in forum Stepper Motors / DrivesReplies: 1Last Post: 11-30-2009, 09:17 PM -
THC trouble?
By Red Earth in forum DynaCNCReplies: 5Last Post: 07-01-2007, 03:04 PM -
100 in/min X, Y, Z with IH CNC Kit. Any Trouble??
By haysys in forum Charter Oak Automation Support ForumReplies: 10Last Post: 02-02-2007, 03:24 AM -
having trouble getting this to cut right
By MIKENLN in forum BobCad-CamReplies: 2Last Post: 04-19-2005, 08:24 AM
Posting Permissions
