on fadal 15xt how can one work with doors open other than dismanteling the door switch / sensor?
The operator says it worked like this but something i have done had changed it so the machine only works with doors perfectly shut/ If you open them the machine stops on the block's finish.
Thread: work with doors open
Results 1 to 2 of 2
-
02-27-2012, 04:57 PM #1
Registered
- Join Date
- Oct 2007
- Posts
- 18
work with doors open
-
02-27-2012, 06:06 PM #2
Registered
- Join Date
- Mar 2003
- Posts
- 900
It is possible to operate any machine by defeating the door interlocks. The question should be "Are you willing to accept the legal, medical, and emotional results of an operator error causing injury and or death?" !
Neal
Reply With QuoteSimilar Threads
-
wallunit doors
By woodman08 in forum Gorilla CNC MachinesReplies: 0Last Post: 05-25-2011, 02:15 AM -
engraving doors
By woodman08 in forum LOGILASE LaserReplies: 0Last Post: 06-12-2010, 11:51 PM -
vfo doors
By billystein in forum Haas MillsReplies: 3Last Post: 06-04-2010, 04:46 PM -
IH closing their doors?
By MichaelHenry in forum Charter Oak Automation Support ForumReplies: 75Last Post: 12-12-2006, 04:07 PM -
What's in work at the open source
By pminmo in forum Open Source Controller BoardsReplies: 0Last Post: 02-13-2005, 08:55 PM
Tags for this Thread
Posting Permissions
