I am looking for a Deer Silhouette that somebody might have made to engrave into some steel. Even better would be something 3D.
Thanks in advance
I am looking for a Deer Silhouette that somebody might have made to engrave into some steel. Even better would be something 3D.
Thanks in advance
MachineSMM
Do you have a scanner? You could scan a picture and run it thru a ras 2 vec converter for toolpathing. You might find something in one of the bitmap libraries in MSWord, or search the net for it.
'Rekd
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
No, I don't have a scanner. It is on the list.
MachineSMM
Did'ny you like the ones put on cadcam ftp site.
12 in all i thought they we awesome.
PEACE
I liked a couple of them. I am just looking for some more options before I start on my project.
MachineSMM
One other thing to consider, shooters use silloettes and may have something you can pilfer. Again, a search on the net should provide something. :cheers:
'Rekd teh Click Click, BOOM!
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Damn it 'rekd shoot it don't blow it up'Rekd teh Click Click, BOOM!
PEACE
Hardmill,
You put 12 deer drawings in the ftp site? I looked but did not see them. Id be interested in looking at them...
My little piece of the web!
http://users.adelphia.net/~wjdupont
If I blow it up, I don't have to drag it's arse back to the truck!Originally posted by hardmill
Damn it 'rekd shoot it don't blow it up
PEACE
'Rekd teh I'm not lazy, I'm effecient
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)