[basswakr]

i am trying to wrap 2d toolpaths onto a 3d surface & can't seem to make it work
i get to the pick reference point & no matter what i put in it won't wrap
can someone give me help on this?

the part is 45" long 4" wide & 5/8" deep with radius on the 4" section with a 5/8" rise

also for the powers to be , could we have an alphacam forum or is that a legal problem or not enough users?

thx
mike

[jweinhold]

Wrap the geometry onto the surface and then create a tool path on the then changed geometry to polyline.

jweinhold

[camnerd]

i am trying to wrap 2d toolpaths onto a 3d surface & can't seem to make it work
i get to the pick reference point & no matter what i put in it won't wrap
can someone give me help on this?

the part is 45" long 4" wide & 5/8" deep with radius on the 4" section with a 5/8" rise

also for the powers to be , could we have an alphacam forum or is that a legal problem or not enough users?

thx
mike

Could you attach the file? It would be helpful, if You shoul have some futher advice..

And Your suggestion towards the Forum - it would be nice - have You suggested this to CNC-ZONE (if there is enough who asks, then it might be??)