584,866 active members*
5,094 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2012
    Posts
    0

    Servos for 604

    I have been trying to find specifications for these motors but cant seem to get any help from electro-craft. Any info at all would be appreciated. The x, y, and quill all have the same motor.
    Was hoping to confirm they are servos not steppers, voltage, amperage, and torque.
    Thanks
    Electro-Craft Corporation
    Permanent Magnet
    Servo Motor-Tach
    Model-E727
    Part# 0727 38 006

  2. #2
    Join Date
    Dec 2003
    Posts
    24216
    Here it is.
    You do not need the tach with modern drives in torque mode.
    Al.
    Attached Files Attached Files
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3
    Join Date
    Mar 2012
    Posts
    0
    Thanks Al
    I assume those are DC?
    Can I run a 12 volt dc power source to them to make sure they are in working order.

  4. #4
    Join Date
    Dec 2003
    Posts
    24216
    Yes to both.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

Similar Threads

  1. DMM Tec Servos
    By lgalla in forum Dmm Technology
    Replies: 421
    Last Post: 10-31-2014, 03:52 PM
  2. DC Servos and EMC
    By parkerbender in forum LinuxCNC (formerly EMC2)
    Replies: 6
    Last Post: 04-05-2010, 05:59 PM
  3. Need DC servos...
    By WilliamD in forum Servo Motors / Drives
    Replies: 4
    Last Post: 03-06-2006, 10:57 PM
  4. Servos
    By cncadmin in forum Mach Software (ArtSoft software)
    Replies: 5
    Last Post: 07-17-2004, 07:19 PM
  5. how about these for servos
    By sdwilson in forum DIY CNC Router Table Machines
    Replies: 6
    Last Post: 12-16-2003, 07:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •