584,805 active members*
4,912 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2012
    Posts
    16

    HEIDENHAIN iTNC530

    Dear every one
    I have machining center with HEIDENHAIN iTNC530 control ,when i turn on machine ,i have {exchange buffer battery} .
    I want to know if i exchange it ,parameters and program of machine will be clear ? or no ?
    best regard
    ali

  2. #2
    Join Date
    Jan 2011
    Posts
    31
    you need to exchange it as soon as possible as this is back up power for memory when machine is powered off

    mick

  3. #3
    Join Date
    Nov 2008
    Posts
    69
    Hi,

    Well, all the information except the date and the clock is on the harddisk.
    So you won't loose parameters nor programs.
    Anyway, I too advice you to change the battery. It is Renata CR2450N.
    Make sure you will get the right battery. (not just normal 2450)

    Jukka

  4. #4
    Join Date
    Apr 2012
    Posts
    0
    Make sure you have the machine powered up when you change the batteries. I bought a used machine and by the time I got a big enough phase converter(5-6 mos) it lost all machine parameters and programs and previous owner didn't make a back up copy of parameters. Someone should make battery tender like for motorcycles to keep plugged into 110 to keep batterys charged. Mine with heidenhain uses 3 AA batteries.
    Good luck, JD

  5. #5
    Join Date
    Oct 2013
    Posts
    8

    Re: HEIDENHAIN iTNC530

    I am on a Hermle 800u with a Heidenhain iTNC530 controller....it had a fat fingered tool calibration program that someone deleted. Is there anyone that can give me some help with a program that calls up tools 6" from the trunion? We are using a vacuum plate and a 3" gage block for setting tool length offsets.

    Thanks in advance

Similar Threads

  1. Heidenhain iTNC530 on GROB 550
    By r_searay in forum Post Processors for MC
    Replies: 1
    Last Post: 05-22-2020, 01:43 PM
  2. Heidenhain iTNC530 cycle
    By YWKim in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 08-09-2013, 05:19 AM
  3. Heidenhain iTNC530
    By Jay Roy in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 03-07-2011, 06:31 PM
  4. Heidenhain iTNC530 First StartUp
    By Leha_Blin in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 11-29-2008, 06:30 PM
  5. Heidenhain iTNC530, how to change plane?
    By Martynas2 in forum G-Code Programing
    Replies: 1
    Last Post: 11-23-2008, 04:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •