So holding a can of wd40 and a shopvac while my machine is running just seems silly. And it is. What is the cheapest and easiest way to get mist cooling? I have a x2 converted mill. I am milling almosy exclusively aluminum. I am looking at picking up an air compressor soon from HF. Any suggestions or recomedations for a cheap easy and containable mist system?
Sent from my SGH-T989 using Tapatalk
Results 1 to 2 of 2
-
03-19-2012, 03:44 PM #1
Registered
- Join Date
- Feb 2012
- Posts
- 0
Uograde my wd40 + shop vac cooling system to mist
-
03-19-2012, 03:48 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
There is a DIY build here in a past using a expired propane cylinder.
It is also on the Machining drop box.
I may have the links somewhere.
http://www.cnczone.com/forums/genera..._producer.html
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
Cooling with HVLP as mist producer?
By jduke in forum MetalWork DiscussionReplies: 28Last Post: 01-01-2015, 11:33 PM -
Spindle cooling with PC Liquid cooling system
By enforcer in forum DIY CNC Router Table MachinesReplies: 9Last Post: 02-07-2012, 09:02 PM -
Is mist for me? (Yet another cooling system decision)
By cnczoner in forum Benchtop MachinesReplies: 39Last Post: 08-22-2010, 05:57 PM -
home-brew mist system v2
By DrStein99 in forum Uncategorised MetalWorking MachinesReplies: 10Last Post: 11-28-2005, 06:14 PM -
Homebrew mist system
By mysterious in forum Uncategorised MetalWorking MachinesReplies: 18Last Post: 11-17-2005, 10:56 PM
Posting Permissions
