Does anyone have SolidCAM post processor files for a DSP controller? This controller is often found on Chinese routers and strictly uses G-code (no M-code, etc.).
Thanks!
Thread: post for DSP controller
Results 1 to 4 of 4
-
03-20-2012, 05:11 AM #1
Registered
- Join Date
- Feb 2005
- Posts
- 30
post for DSP controller
-
03-20-2012, 04:50 PM #2
Registered
- Join Date
- Feb 2005
- Posts
- 30
If someone doesn't have a specific post processor for this controller, can you point me to one of the standard posts that only outputs G-code and would possibly work?
Since this is a router without a tool changer, etc. it doesn't need a lot of bells and whistles or canned routines and such.
-
03-29-2012, 05:04 PM #3
Registered
- Join Date
- Feb 2005
- Posts
- 30
Ok, can someone please share a post they're using that just outputs plain G-code (no other codes) for a simple CNC router?
-
03-29-2012, 07:09 PM #4
Gold Member
- Join Date
- Jan 2006
- Posts
- 2985
I would be QUITE surprised if there is any cam package that won't output "generic g-code" using a generic post which is included with the software.
Visual mill has one
Mastercam has one
Artcam has one
are you seeing a trend?
Matt
Reply With QuoteSimilar Threads
-
HAAS VF1 post controller
By burton564 in forum CamWorksReplies: 12Last Post: 10-10-2017, 12:51 PM -
DX-32 controller post
By Cellar Dweller in forum Post Processors for MCReplies: 2Last Post: 01-06-2011, 07:24 AM -
post for t-2 controller
By tward74 in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 03-21-2010, 08:45 AM -
Need post for Fanuc 0MC Controller
By Bruce Griffing in forum Dolphin CAD/CAMReplies: 4Last Post: 09-18-2009, 09:55 AM -
Post for WinCNC Controller 2.1
By tgramel in forum WinCncReplies: 2Last Post: 03-31-2008, 11:56 PM
Posting Permissions
