O4001
(PROGRAM NO.=????)
(COMPANY NAME:????)
(PART NAME:????)
(PART NO.& REV:????)
(PROGRAM BY:????)
(DATE-???? /TIME-???? )
(WORK OFFSETS
(X0=CENTER OF PART)
(Y0=CENTER OF PART)
(Z0=ON TOP OF PART)
(SET UP NOTES
(ROTATE PART 5 DEGREE CCW & LINE UP 2 HOLE)
N1 ( PLUNG OTHER END OF SLOT )
G00 G17 G40 G49 G80 G90
hi everyone, how do i make a template (see up there) in mastercam when i post it out to g-code, so i don't need to type it again, thank you....
Thread: Edit Haas VF Post
Results 1 to 2 of 2
-
11-22-2005, 08:36 AM #1
Registered
- Join Date
- Nov 2005
- Posts
- 35
Edit Haas VF Post
-
11-22-2005, 03:55 PM #2
Community Moderator
- Join Date
- Apr 2003
- Posts
- 3578
Looks Like my Haas post I was just about to ask did you get a copy of mine.
Send me an email we will see waht we can do.(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Reply With Quote
Posting Permissions
