584,817 active members*
4,802 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2009
    Posts
    57

    Leveling Pads

    Looking for these cast leveling pads. I tried googling the casting number on the bottom but haven't had any luck. These came with a used Cincinnati Milacron machine I just bought but I don't know if they are from Cincinnati or if they are a generic machine base/pad. Was hoping to get another set of them for another machine I have because they are pretty nice pieces. The casting number is 1273273. The base of the cone is about 3-1/2" and the top is about 2-3/8". The hole in the top is about 3/8" and the larger diameter of the taper for the leveling screw to sit in is about 1".

    Thanks for any heads up or for links to something similar.




  2. #2
    Join Date
    Dec 2013
    Posts
    5717

    Re: Leveling Pads

    Those exact pads don't seem to be available. A Google search did turn up some similar on EBay

    https://www.ebay.com/itm/4-7-16-Dia-...UAAOSwKOJYJdku


    https://www.ebay.com/itm/4-3-4-Dia-C...-/173017719461

    I guess I would just make some from steel if I really wanted a set exactly as you show.
    Jim Dawson
    Sandy, Oregon, USA

  3. #3
    Join Date
    Aug 2009
    Posts
    57

    Re: Leveling Pads

    Yeah, I didn't have any luck with internet searches either. Thanks for trying though!

Similar Threads

  1. pads
    By LeWhite in forum Haas Mills
    Replies: 1
    Last Post: 07-17-2015, 10:46 AM
  2. Leveling pads - steel or rubber?
    By Aaronh in forum Uncategorised MetalWorking Machines
    Replies: 4
    Last Post: 08-01-2014, 08:00 PM
  3. Bridgeport Mill Leveling Pads
    By minton in forum Bridgeport / Hardinge Mills
    Replies: 6
    Last Post: 08-15-2009, 05:47 PM
  4. S30 collet pads
    By dbaron58 in forum Metalworking- / Woodworking Tooling / Manual Machining
    Replies: 1
    Last Post: 06-03-2009, 04:09 AM
  5. PCB solder pads
    By MrWild in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 05-21-2008, 02:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •