[Roswell28]

I'm Having a hard time trying to configurate the software mach3 in order to comunicate the pc with the servos.....

On screen everything looks that it is working and there are no errors found, but the machine is not moving at all......

I need some help with the configuration of the pins.....

[guslam52]

I'm Having a hard time trying to configurate the software mach3 in order to comunicate the pc with the servos.....

On screen everything looks that it is working and there are no errors found, but the machine is not moving at all......

I need some help with the configuration of the pins.....

I know this is an old post but did you ever get your K2CNC 5050 configured?
because I have a K2CNC 4925 with the same problem.

please send a PM and I'll forward my info.

Hope to hear back from you.

Thank you
Gilles

[LuRome]

I'm Having a hard time trying to configurate the software mach3 in order to comunicate the pc with the servos.....

On screen everything looks that it is working and there are no errors found, but the machine is not moving at all......

I need some help with the configuration of the pins.....

Saludos Roswell, usted encontro informacion.... soy de Costa Rica y requiero informacion del K2CNC KG-5050 Router

[aarggh]

Is a MACH3 config file supplied from the supplier of the machine to just load in for the right parameters?

cheers, Ian

[CNC-repair]

Give us a call 9494285079 i can help cncrepair.us