I am setting up an X4 Standard with Mach3, but I'm having issues getting the spindle to be computer controlled using Mach3. I have attached the .xml config file (as a .txt file, unfortunately I can't upload .xml). I can control the X Y Z axes fine with Mach3, but am unable to start the spindle using the computer.
I have verified that the spindle switch is closed, allowing for computer control. When the spindle switch is open, I am able to start and change the speed of the spindle on the machine panel, so the problem is not with the spindle itself. The machine was purchased less than a year ago, so I'm guessing something is just wrong with the configuration. I've tried the default X4 .xml files also but nothing lets me start the spindle with Mach3.
Appreciate the help.