I am setting up an X4 Standard with Mach3, but I'm having issues getting the spindle to be computer controlled using Mach3. I have attached the .xml config file (as a .txt file, unfortunately I can't upload .xml). I can control the X Y Z axes fine with Mach3, but am unable to start the spindle using the computer.
I have verified that the spindle switch is closed, allowing for computer control. When the spindle switch is open, I am able to start and change the speed of the spindle on the machine panel, so the problem is not with the spindle itself. The machine was purchased less than a year ago, so I'm guessing something is just wrong with the configuration. I've tried the default X4 .xml files also but nothing lets me start the spindle with Mach3.