Hello,

I have problem with MORI SEIKI MV 35/40. After 10 minuts working of spindle, on the screen comes a error message "DC link current to high". On regulator, lights "error 12". I check regulator, motor and everything looks fine. I check parameters of spindle,(parameters 5600 - 5756) and in parameters are only "0". Only "5614 SP GAIN" is set on 808, rest is set on 0. In my opinion problem is with the parameters of spindle. Ther is fanuc 11m controler. Anyone have parameters of spindle for this type of machine? I will be grateful for any help.

Regards
zolni