HI, Guys I,m new to Mach3. I,m using an older micro proto running Mach3.
When I,m drilling a bolt pattern the machine is drilling the hole on the left side
of a plate Mach thinks it,s on the right side.
HI, Guys I,m new to Mach3. I,m using an older micro proto running Mach3.
When I,m drilling a bolt pattern the machine is drilling the hole on the left side
of a plate Mach thinks it,s on the right side.
Check your axis scaling in Mach3. It should be "1" and not "-1". Hope it helps
farmertom
farmertom
http://cncartwork.weebly.com/index.html
Or, you have your machine set up with one axis backwards.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)