[Scooby-NH]

I'm having trouble with the Mach3 in Mastercam.
From what I could see the problem is in the lines where I and J are generated
Example: Y11708 N1460 X-5624, I-12 154 J34.198
Anyone know if this has a solution?
I continued my work depends on the solution of this problem ...........(group)

[WallyL7]

I am not familiar with mach 3 so I won't be much help other than to say to get with your mcam reseller and have them trouble shoot this for you...which I assume you have tried?

Outside that, try emastercam. Perhaps someone there uses both.

[Scooby-NH]

I am not familiar with mach 3 so I won't be much help other than to say to get with your mcam reseller and have them trouble shoot this for you...which I assume you have tried?

Outside that, try emastercam. Perhaps someone there uses both.

Thanks for your time my friend .................. finally resolved the problem myself

[WallyL7]

Thanks for your time my friend .................. finally resolved the problem myself

One of the things about starting a string is to have it come to some sort of conclusion. If you solved it great...but perhaps you can state what you did in order to fix your problems so we don't have this string again.

You never know who it can help in the future.

[Scooby-NH]

One of the things about starting a string is to have it come to some sort of conclusion. If you solved it great...but perhaps you can state what you did in order to fix your problems so we don't have this string again.

You never know who it can help in the future.

You have good reason ............... the whole problem is the values ​​of I and J values ​​of these lines that exceed 600 mm.
And this problem still happens sometimes depending on the machining.
Using the "Surface High Speed ​​toolpaths" in a cavity the values ​​fall outside the area of the machine I'm using that is 350 by 250 in X-Y
Already when I use it on a boss values ​​are within the limits of the machine I'm using.
So do not completely solved the problem ............ Mastercam some expert out there could provide a solution to this problem.