Hello all,
Ive got 2 older Kitamura Mycenter 2b's, both running a Fanuc 11M (one older than the other, but both pretty much the same).
I'm running NCNet Lite 7.0 for DNC software, and all was working perfectly until IT brought out this newer computer so we would have our own instead of sharing.
I have pulled all the settings from the other computer, and everything works well on our older machine, also, i have no problems receiving programs from the newer machine, however, i cannot send anything to the newer one.
I have a feeling this is a machine issue, and just an odd coincidence in timing that i cant get the new computer set up. My reasoning behind this is that when i press the "READ" softkey, and it goes to read the program, it pulls a blank program and just keeps waiting, whether or not the DNC is hooked up to the machine. On the older machine, it instantly pops a DR OFF alarm (which i fully expect).
Possibly also related, Maint replaced the feed hold button late last week due to it sticking, and since its in the area, maybe they brushed up on some wires?
Currently running Baud 2400, Even, 7, 2, with Hardware handshake (settings for both machines, that worked previously).
I have messed with the baud rates (changed both in program and on machine at the same time), but nothing has gotten any progress.
Any help would be appriciated