585,930 active members*
3,665 visitors online*
Register for free
Login

Thread: Need 1/2” 10 tpi 2 start threaded collars

Results 1 to 3 of 3
  1. 03-25-2023, 02:18 AM #1
    sblack
    sblack is offline Registered
    Join Date
    Dec 2005
    Posts
    33

    Need 1/2” 10 tpi 2 start threaded collars

    I built a Joe’s router in 2006. Used it for 100s of projects. But it’s been so long I have lost the sources for some of the hardware. I managed to bust one of the threaded collars used to set the preload on one if the lead screws. They are all 1/2” 10 tpi 2 start screws. Anyone know where i can find threaded collars to fit?
    Reply With Quote Reply With Quote
  2. 03-25-2023, 06:46 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538

    Re: Need 1/2” 10 tpi 2 start threaded collars

    I think Dumpster CNC used to make those, and he retired. Not aware of any others.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 03-26-2023, 06:39 PM #3
    scttb
    scttb is offline Member
    Join Date
    Mar 2023
    Posts
    1

    Re: Need 1/2” 10 tpi 2 start threaded collars

    Quote Originally Posted by ger21 View Post
    I think Dumpster CNC used to make those, and he retired. Not aware of any others.
    Yes! That was it. Too bad he’s gone ☹️
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Need 1/2in 10 tpi single start acme leadscrew
    By Momentz in forum Australia, New Zealand Club House
    Replies: 2
    Last Post: 10-04-2011, 04:00 PM
  2. Need 1/2in 10 tpi single start acme leadscrew
    By Momentz in forum DIY CNC Router Table Machines
    Replies: 5
    Last Post: 10-02-2011, 03:11 PM
  3. 2-Start 1/2" 10 (5 TPI) acme tap?!??!
    By ewest in forum Linear and Rotary Motion
    Replies: 4
    Last Post: 03-21-2007, 01:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules