584,800 active members*
4,602 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1

    Question Software change request

    Using Mach3.


    I'm not sure if I'm doing this right, but when I go to zero a tool and set the offsets for my part location, I have to click the Jog % way down, sneak up on my part, then click 30+ time to increase the jog to do something esleware!

    Could you please place a max button or a key combo like for the jog, that would pop it back to 100%?

    ( If I only had a Manual Pulse Generator & a pendant! :tired: )

    Thank you,

    Eric A. Arnold

  2. #2
    Join Date
    Mar 2003
    Posts
    35538
    Hold down shift while jogging for fast jog. Set your slow jog to something like 5%, hold down shift and jog down close. Then use the slow jog to get your zero. Hold down shift to jog quickly back up.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Thanks for the reply Gerry, I'll try that!

    Eric

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •