584,833 active members*
5,809 visitors online*
Register for free
Login

Thread: Sieg KX3B

Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2012
    Posts
    1

    Sieg KX3B

    Hi All

    I am trying to get my Sieg KX3B mill to run with G-Code created from BobCad-Cam V24. The mill documentation states that is is Funduc compatible, and as such I have tried using some of the Funduc post-processors.

    Unfortunately all the generated G-Code fails at the first hurdle when the mill software verifies the code.

    Is there anyone who can advise which the correct Post Processor is to use for my milling machine.

    Thanks

  2. #2
    Join Date
    Dec 2011
    Posts
    361
    You can contact technical support or request a post processor to be created for your specific machine, with information provided by you.

    Link:
    Post Request | BobCAD-CAM

    Please be advised that all post creation is subject to an active technical support subscription, with a minimum of Level 1 Support. The number to contact technical support is 727-489-0003.

Similar Threads

  1. CNC-kit for Sieg X3/SX3
    By Novec in forum Norwegian
    Replies: 79
    Last Post: 03-30-2012, 03:53 PM
  2. Sieg SX4
    By thebowman in forum Benchtop Machines
    Replies: 5
    Last Post: 05-12-2010, 04:32 AM
  3. Help! What is Sieg X1, X2, X3?
    By cjchands in forum Benchtop Machines
    Replies: 4
    Last Post: 10-12-2006, 11:20 AM
  4. Sieg X2 and X3
    By rozon in forum Benchtop Machines
    Replies: 12
    Last Post: 05-05-2006, 02:23 PM
  5. Sieg X2 cnc kit at LMS
    By KDN Tool in forum News Announcements
    Replies: 0
    Last Post: 11-18-2005, 09:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •