[L. Sakthivel]

Dear Friends

We bought a OKUMA LC 30 Used CNC Lathe withOSP 5000 LG Control. We are not Having any Backup Parameter & Software for this Machine.

While switching ON We are getting this alarm No 2136 Bubble Memory Read Error 10000 Parity.

Any body can suggest what to do And mail the Parameter, Parameter Manual, Maintenance Manual etc. & Software.

Thanks Regard
L. Sakthivel

[underthetire]

Sounds like you need a replacement memory card. Software will have to be cut and loaded by okuma. Parameters are automatically loaded with new software. Those came originally on either tape or 8 1/2 floppy disk depending on year.