[Melody-gweike]

Good weekend everyone!

This afternoon I went to our factory to do a test of making silicone bracelets. Because these days some customers asked for this, and i also wanted to make some for the concert which i will watch later.

1) my technician and i chose a new rotary for this

[Melody-gweike]

2) Measuring the dia.

[Melody-gweike]

3. Calculating

[Melody-gweike]

4. Setting the Parameters

[Melody-gweike]

5） a short engraving video.

Not very good, because we don't connect the air compressor when we test in the factory. Also because of the machine size is a little large (LC1290) and the power was also a little large~~

[ame=http://www.youtube.com/watch?v=UJMCik3cAc8]silicone laser engraving - YouTube[/ame]

:wave: Runar, hope you can watch this!

[Melody-gweike]

6) We changed to a desktop machine and found an easy way for this. We fixed the bracelets to a small box. And now it is very easy to engrave~ Although it makes a little smoke & fire because without an air compressor, but the result seems much better now~


[ame=http://www.youtube.com/watch?v=3uHzxSiuGto]silicone laser engraving 2 - YouTube[/ame]

[Melody-gweike]

7) Another video
[ame=http://www.youtube.com/watch?v=svHq0fAty_0]Silicone laser engraving3 - YouTube[/ame]

[Melody-gweike]

8) Finished product

[Melody-gweike]

9) Finished product
It's luminous~

[Melody-gweike]

Tips:

1. Choose low power. What we used was W2 Reci which was 90W-110W. I think 60W will be better
2. If want deeper result, larger power and slower speed setting when engraving is OK.
Anybody who is interested in this or has suggestions can write to me or chat with me

[email protected] [email protected]
skype: melody.gweike

Melody

[insound]

very nice