507,847 active members
2,851 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > C-axis help on the lower turret
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Sep 2009
    Posts
    4

    C-axis help on the lower turret

    I have a Doosan Puma Mx2500 LST and am trying to use the C-axis with the lower turret on the left spindle. The program is right and as soon as the program gets to the G12.1 it throws a 009 alarm. I do have the M211 composition turned on. So I am confused on what is making it throw the alarm.

  2. #2
    Gold Member
    Join Date
    Mar 2003
    Posts
    2923
    Please post that section of your program. PS009 is "ILLEGAL ADDRESS INPUT". Sounds like something other than the G12.1 is causing the alarm.

Similar Threads

  1. Parking the lower turret
    By Dan B in forum Esprit
    Replies: 3
    Last Post: 01-25-2013, 08:12 PM
  2. Mori MT200SZ lower turret
    By Green Button in forum Mori Seiki lathes
    Replies: 1
    Last Post: 06-09-2011, 03:28 PM
  3. Macturn: Tool change during lower turret move
    By Green Button in forum Okuma
    Replies: 2
    Last Post: 12-20-2010, 07:37 AM
  4. Hardinge Superslant SB3 GN 3 Axis Lower Turret
    By LMartin in forum Hardinge Lathes
    Replies: 18
    Last Post: 09-17-2010, 03:42 PM
  5. Lower turret won't feed
    By bvaught in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 11-17-2004, 12:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •