584,860 active members*
4,998 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tree > Can someone check this code for Dyna 20
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2004
    Posts
    176

    Can someone check this code for Dyna 20

    I am looking at purchasing a nice used Journeyman 325 with the Dynapath 20 control on it. I have an appointment coming up to go inspect it in person. I did a simple program up in my CAD/CAM and would like someone who is familiar with the control to go over and see if my post is outputting the correct code. I am more familiar with Fanuc style code.

    Thanks for any help in advance.

    1/4" tool used for all operations.

    First operation

    Drill down .5" pecking with full retract .1 deep at a time

    Mill an inside square pocket 2"x2"

    Final- mill an outside 4" diameter circle with a .250 lead in /lead out radius

    (1)$
    N2(T)TOOL 1$
    N4(T)OPERATION 1$
    N6(9)T0001M6E54$
    N8(9)M8$
    N10(9)M3S3000$
    N12(0)X0Y0$
    N14(0)Z0$
    N16(0)Z0.1$
    N18(0)X0Y0Z-0.5K0.1W0.1F5.0G3$
    N20(0)Y0.5$
    N22(0)X0.5Y0$
    N24(0)X0Y-0.5$
    N26(0)X-0.5Y0$
    N28(0)G0$
    N30(T)TOOL 1$
    N32(T)OPERATION 2$
    N34(0)X0$
    N36(1)Z-0.05$
    N38(1)Y-0.125$
    N40(1)X0.125F50.0$
    N42(1)Y0.125$
    N44(1)X-0.125$
    N46(1)Y-0.125$
    N48(1)X0$
    N50(1)Y-0.25$
    N52(1)X0.25$
    N54(1)Y0.25$
    N56(1)X-0.25$
    N58(1)Y-0.25$
    N60(1)X0$
    N62(1)Y-0.375$
    N64(1)X0.375$
    N66(1)Y0.375$
    N68(1)X-0.375$
    N70(1)Y-0.375$
    N72(1)X0$
    N74(1)Y-0.5$
    N76(1)X0.5$
    N78(1)Y0.5$
    N80(1)X-0.5$
    N82(1)Y-0.5$
    N84(1)X0$
    N86(1)Y-0.625$
    N88(1)X0.625$
    N90(1)Y0.625$
    N92(1)X-0.625$
    N94(1)Y-0.625$
    N96(1)X0$
    N98(1)Y-0.75$
    N100(1)X0.75$
    N102(1)Y0.75$
    N104(1)X-0.75$
    N106(1)Y-0.75$
    N108(1)X0$
    N110(1)Y-0.875$
    N112(1)X0.875$
    N114(1)Y0.875$
    N116(1)X-0.875$
    N118(1)Y-0.875$
    N120(1)X0$
    N122(0)Z0.1$
    N124(0)Y0$
    N126(0)Z0.05$
    N128(1)Z-0.1F5.0$
    N130(1)Y-0.125$
    N132(1)X0.125F50.0$
    N134(1)Y0.125$
    N136(1)X-0.125$
    N138(1)Y-0.125$
    N140(1)X0$
    N142(1)Y-0.25$
    N144(1)X0.25$
    N146(1)Y0.25$
    N148(1)X-0.25$
    N150(1)Y-0.25$
    N152(1)X0$
    N154(1)Y-0.375$
    N156(1)X0.375$
    N158(1)Y0.375$
    N160(1)X-0.375$
    N162(1)Y-0.375$
    N164(1)X0$
    N166(1)Y-0.5$
    N168(1)X0.5$
    N170(1)Y0.5$
    N172(1)X-0.5$
    N174(1)Y-0.5$
    N176(1)X0$
    N178(1)Y-0.625$
    N180(1)X0.625$
    N182(1)Y0.625$
    N184(1)X-0.625$
    N186(1)Y-0.625$
    N188(1)X0$
    N190(1)Y-0.75$
    N192(1)X0.75$
    N194(1)Y0.75$
    N196(1)X-0.75$
    N198(1)Y-0.75$
    N200(1)X0$
    N202(1)Y-0.875$
    N204(1)X0.875$
    N206(1)Y0.875$
    N208(1)X-0.875$
    N210(1)Y-0.875$
    N212(1)X0$
    N214(0)Z0.1$
    N216(0)Y0$
    N218(0)Z0$
    N220(1)Z-0.15F5.0$
    N222(1)Y-0.125$
    N224(1)X0.125F50.0$
    N226(1)Y0.125$
    N228(1)X-0.125$
    N230(1)Y-0.125$
    N232(1)X0$
    N234(1)Y-0.25$
    N236(1)X0.25$
    N238(1)Y0.25$
    N240(1)X-0.25$
    N242(1)Y-0.25$
    N244(1)X0$
    N246(1)Y-0.375$
    N248(1)X0.375$
    N250(1)Y0.375$
    N252(1)X-0.375$
    N254(1)Y-0.375$
    N256(1)X0$
    N258(1)Y-0.5$
    N260(1)X0.5$
    N262(1)Y0.5$
    N264(1)X-0.5$
    N266(1)Y-0.5$
    N268(1)X0$
    N270(1)Y-0.625$
    N272(1)X0.625$
    N274(1)Y0.625$
    N276(1)X-0.625$
    N278(1)Y-0.625$
    N280(1)X0$
    N282(1)Y-0.75$
    N284(1)X0.75$
    N286(1)Y0.75$
    N288(1)X-0.75$
    N290(1)Y-0.75$
    N292(1)X0$
    N294(1)Y-0.875$
    N296(1)X0.875$
    N298(1)Y0.875$
    N300(1)X-0.875$
    N302(1)Y-0.875$
    N304(1)X0$
    N306(0)Z0.1$
    N308(0)Y0$
    N310(0)Z-0.05$
    N312(1)Z-0.2F5.0$
    N314(1)Y-0.125$
    N316(1)X0.125F50.0$
    N318(1)Y0.125$
    N320(1)X-0.125$
    N322(1)Y-0.125$
    N324(1)X0$
    N326(1)Y-0.25$
    N328(1)X0.25$
    N330(1)Y0.25$
    N332(1)X-0.25$
    N334(1)Y-0.25$
    N336(1)X0$
    N338(1)Y-0.375$
    N340(1)X0.375$
    N342(1)Y0.375$
    N344(1)X-0.375$
    N346(1)Y-0.375$
    N348(1)X0$
    N350(1)Y-0.5$
    N352(1)X0.5$
    N354(1)Y0.5$
    N356(1)X-0.5$
    N358(1)Y-0.5$
    N360(1)X0$
    N362(1)Y-0.625$
    N364(1)X0.625$
    N366(1)Y0.625$
    N368(1)X-0.625$
    N370(1)Y-0.625$
    N372(1)X0$
    N374(1)Y-0.75$
    N376(1)X0.75$
    N378(1)Y0.75$
    N380(1)X-0.75$
    N382(1)Y-0.75$
    N384(1)X0$
    N386(1)Y-0.875$
    N388(1)X0.875$
    N390(1)Y0.875$
    N392(1)X-0.875$
    N394(1)Y-0.875$
    N396(1)X0$
    N398(0)Z0.1$
    N400(0)Y0$
    N402(0)Z-0.1$
    N404(1)Z-0.25F5.0$
    N406(1)Y-0.125$
    N408(1)X0.125F50.0$
    N410(1)Y0.125$
    N412(1)X-0.125$
    N414(1)Y-0.125$
    N416(1)X0$
    N418(1)Y-0.25$
    N420(1)X0.25$
    N422(1)Y0.25$
    N424(1)X-0.25$
    N426(1)Y-0.25$
    N428(1)X0$
    N430(1)Y-0.375$
    N432(1)X0.375$
    N434(1)Y0.375$
    N436(1)X-0.375$
    N438(1)Y-0.375$
    N440(1)X0$
    N442(1)Y-0.5$
    N444(1)X0.5$
    N446(1)Y0.5$
    N448(1)X-0.5$
    N450(1)Y-0.5$
    N452(1)X0$
    N454(1)Y-0.625$
    N456(1)X0.625$
    N458(1)Y0.625$
    N460(1)X-0.625$
    N462(1)Y-0.625$
    N464(1)X0$
    N466(1)Y-0.75$
    N468(1)X0.75$
    N470(1)Y0.75$
    N472(1)X-0.75$
    N474(1)Y-0.75$
    N476(1)X0$
    N478(1)Y-0.875$
    N480(1)X0.875$
    N482(1)Y0.875$
    N484(1)X-0.875$
    N486(1)Y-0.875$
    N488(1)X0$
    N490(0)Z0.1$
    N492(T)TOOL 1$
    N494(T)OPERATION 3$
    N496(0)X-0.2622Y2.3737$
    N498(1)Z-0.125F5.0$
    N500(2)X-0.0109Y2.125I-0.0122J2.375D1$
    N502(2)I0J0F50.0D0$
    N504(2)X0.2378Y2.3763I-0.0122J2.375D1$
    N506(0)Z0.1$
    N508(9)M30$
    END$

  2. #2
    Join Date
    Jul 2010
    Posts
    40
    Greetings-
    I cannot advise on conversational, but see below.
    Todd

  3. #3
    Join Date
    Jul 2010
    Posts
    40
    Greetings-

    I posted an EIA example for you in the other forum.
    Todd

  4. #4
    Join Date
    Mar 2012
    Posts
    0
    It would take way too long to write out everything that is wrong with that program.If you want PM me your phone number and I'll walk you thru what needs to be changed.

    Almost all of our machines at work at work use the Dynapath controls.

Similar Threads

  1. Replies: 195
    Last Post: 03-02-2014, 02:17 AM
  2. Rotary G-Code check..!
    By xray34 in forum G-Code Programing
    Replies: 2
    Last Post: 11-25-2010, 01:10 PM
  3. DYNA MECHTRONICS DYNA MYTE 3000 AND 2800 WANTED!!!
    By britcollector in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 02-23-2010, 04:20 AM
  4. Replies: 3
    Last Post: 01-19-2007, 02:59 PM
  5. Undercut Check not perform in g-code
    By Wiseco in forum FeatureCAM CAD/CAM
    Replies: 5
    Last Post: 11-22-2005, 11:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •