509,749 active members
3,481 visitors online
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Nov 2005
    Posts
    2

    Exclamation EIA file transfer to Mazak Fusion

    Does anyone here in the USA use ProNC Communication Software to remotely transfer EIA programs?

  2. #2
    Registered
    Join Date
    Feb 2006
    Posts
    949
    I prefer Cable, because too much interfee..... with remote. Nice future but not recommend.

  3. #3
    Registered
    Join Date
    Mar 2005
    Posts
    988
    I prefer Cable, because
    It looks like it is cable....???? Not much "future" about it. Multiple DNC systems have been around awhile. Predator, Ascendent,... etc. Looks like a nice system though. Been using wireless systems for awhile too. No problems.
    It's just a part..... cutter still goes round and round....

  4. #4
    Registered
    Join Date
    Sep 2005
    Posts
    767

    Mazak Fusionj

    We do remote file callups for both EIA and Mazatrol CMT files with our PC-DNC Plus software, so I know it works. I'm not sure why your ProNC software doesn't work because I've never used it.

    Can you send a file to the DNC system from the Mazak? If you can, (but you can't send one back), you're probably not sending the data in the correct format. Mazaks need that "%" at the beginning and end of the file. If you can't send files either way, double check to be sure that your baudrate and stop-bits settings are the same on the Mazak and on the DNC system.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •