Does anyone here in the USA use ProNC Communication Software to remotely transfer EIA programs?
Results 1 to 4 of 4
-
12-02-2005, 03:06 PM #1
Registered
- Join Date
- Nov 2005
- Posts
- 2
EIA file transfer to Mazak Fusion
-
02-23-2006, 03:27 AM #2
Registered
- Join Date
- Feb 2006
- Posts
- 992
I prefer Cable, because too much interfee..... with remote. Nice future but not recommend.
-
02-23-2006, 03:55 PM #3
Registered
- Join Date
- Mar 2005
- Posts
- 988
It looks like it is cable....???? Not much "future" about it. Multiple DNC systems have been around awhile. Predator, Ascendent,... etc. Looks like a nice system though. Been using wireless systems for awhile too. No problems.I prefer Cable, becauseIt's just a part..... cutter still goes round and round....
-
02-23-2006, 06:28 PM #4
Registered
- Join Date
- Sep 2005
- Posts
- 767
Mazak Fusionj
We do remote file callups for both EIA and Mazatrol CMT files with our PC-DNC Plus software, so I know it works. I'm not sure why your ProNC software doesn't work because I've never used it.
Can you send a file to the DNC system from the Mazak? If you can, (but you can't send one back), you're probably not sending the data in the correct format. Mazaks need that "%" at the beginning and end of the file. If you can't send files either way, double check to be sure that your baudrate and stop-bits settings are the same on the Mazak and on the DNC system.
Reply With Quote
Posting Permissions
