[robmc123]

Hi I need help i don't know if its a setting or something im not doing right.
Im new to this software so im sure it something im not doing.

I wanted to start out slow i made a 4X4 square with an approach, that part was easy and i click on "insert nc" selected "agie cnc 123" I selected this one cos it seemed like the right output codes on it, I could be wrong.

The wire EDM is an agie cnc 100 legend

after this i tried running it and it did not work, so i add some G01's it look like it was missing and it did something but it was no square.

ill post links in my next post

any help would be greatly appreciated
Thanks
Rob

[robmc123]

I do have a working file to reference to.
5-8-2012 8-06-00 AM | Flickr - Photo Sharing!

this is what I have tried
5-8-2012 7-44-22 AM | Flickr - Photo Sharing!

[SeanDa]

If you need a custom post created, we will be happy to assist in creating the post. I am providing the link for the post request page.

Link:
Post Request | BobCAD-CAM

Sean P Daugherty
BobCAD-CAM Technical Support