I'm getting an intermittant Runtime error that doesn't allow me to generate a machine file: C:\runtime4_1/pt/ptc.exe. It doesn't do it for every file. Anyone run into this?
Thread: Runtime error
Results 1 to 1 of 1
-
05-17-2012, 06:43 PM #1
Registered
- Join Date
- May 2010
- Posts
- 10
Runtime error
Machines we run: Multicam 3-205R, 5x12 table, 11hp Eurospindle, 20hp pump, Enroute 4.1, and Komo VR510 Mach I: 5x10 table, 20hp spindle, 40hp pump.
Reply With QuoteSimilar Threads
-
Yaskawa Servopack error: A.D1. Motor Load Position Excess Error
By Syphonics in forum Servo Motors / DrivesReplies: 0Last Post: 04-26-2012, 07:53 AM -
Mastercam X Editor Malfunction - Runtime error
By MachiningPartne in forum MastercamReplies: 4Last Post: 11-06-2011, 04:49 PM -
"Runtime error 9 - subscript out of range" on Techno CNC interface
By zhoudfoster in forum CNC (Mill / Lathe) Control Software (NC)Replies: 4Last Post: 10-26-2009, 04:57 AM -
Runtime error
By msme-lc in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 09-30-2008, 10:14 PM
Tags for this Thread
Posting Permissions
