We have several machines with fanuc data server option.
In the fanuc 16i and 18i, there is an soft key "READ" to transfer programs from the hd-dir to the cnc-mem.
In the 30i controll the "READ" key is gone.
Who knows how to do it ?
Thread: Fanuc 30i Data-server read
Results 1 to 4 of 4
-
06-01-2012, 12:19 PM #1
Registered
- Join Date
- Jun 2010
- Posts
- 0
Fanuc 30i Data-server read
-
06-02-2012, 05:28 PM #2
Registered
- Join Date
- Oct 2010
- Posts
- 131
I think the same function is there in 30i also....
transmit the program from Server and read it from the machine.....
-
06-02-2012, 05:29 PM #3
Registered
- Join Date
- Oct 2010
- Posts
- 131
or else check the manual of 30i...
-
06-04-2012, 06:48 AM #4
Registered
- Join Date
- Jun 2010
- Posts
- 0
Harmeet,
We can read it in de "HD-DIR" with the get command, after this there is no soft key "READ". The machine is set in "STORAGE MODE"
Reply With QuoteSimilar Threads
-
0T-C Data Server
By Scottjit in forum FanucReplies: 4Last Post: 05-27-2011, 12:07 AM -
Setting up VF3 to read off server
By kbspeed in forum Haas MillsReplies: 3Last Post: 11-04-2010, 12:40 AM -
Data Server with a Fanuc 18MB
By buildyourown in forum FanucReplies: 0Last Post: 06-24-2008, 05:49 AM -
Data server question
By npinto in forum CNC (Mill / Lathe) Control Software (NC)Replies: 2Last Post: 11-09-2007, 10:47 PM -
Fanuc 18i with Data Server
By Monty66 in forum FanucReplies: 6Last Post: 02-13-2007, 04:23 AM
Posting Permissions
