501,677 active members
5,986 visitors online
Register for free
Login
Results 1 to 10 of 10
  1. #1
    Registered
    Join Date
    Jul 2005
    Posts
    4

    Lightbulb Hypertherm 1000 Machine Torch Help

    Anybody have pictures or diagrams of a Hypertherm Machine torch. Or know what wires do what? Trying to convert a manual to a machine and use hypertherms cnc controls but I am having trouble finding a good diagram of a machine torch. So if anybody has a machine torch laying around perferably disassembled and can take pictures or draw up a diagram and post them I would appreciate it.

    Thanks
    matt

  2. #2
    Registered
    Join Date
    Mar 2005
    Posts
    339
    Hi,

    Is there somebody who homebuilt a plasma cutter? I mean the power supply and torch. For me a plasma cutter is far too expensive but I would try to build one as my plan after three cnc machines built is to build a machine from AL extrusions with the possibility to be used as a plasma cnc. I would appreciate at least some guidelines about the schematics of such a device and parameters.

    Thank you.

    Zoltan

  3. #3
    Registered
    Join Date
    Mar 2005
    Posts
    339
    Nobody can help? At least a place where I can see such a schematics??

    Thank you.

    Zoltan

  4. #4
    Gold Member
    Join Date
    Aug 2004
    Posts
    48
    The photos I sent you were not what you were looking for? If not please are more specific and I will see what I can do.
    Greg

  5. #5
    Registered
    Join Date
    Mar 2005
    Posts
    339
    Sorry Greg, but I did not get photos. I have received nothing. Where did you send the photos?

    Thank you.

    Zoltan

  6. #6
    Gold Member
    Join Date
    Aug 2004
    Posts
    48
    Take a look here I put them on my site Hypertherm 900
    If you need more let me know and I will try to get it

  7. #7
    Registered
    Join Date
    Oct 2005
    Posts
    1241
    Zoltan
    There is a schematic & video you might be interested in if you are a member of another group.
    Try the Yahoo Group for Plasmacutting.
    Look in the "Files" for "Home Brew Plasma"
    WT

  8. #8
    Registered
    Join Date
    Mar 2005
    Posts
    339
    Thank you both. Actually, I am looking for a schematics - the controller of plasma cutter. The pictures are Ok, but do you have also the schematics of the controller/driver?

    Thank you again.

    Zoltan

    PS: I am going to look on Yahoo, but I believe it is the simple schematics with water resistor I have seen yesterday on net. I am looking for something more efficient and electronically controlled.

    Zoltan

  9. #9
    Gold Member
    Join Date
    Aug 2004
    Posts
    48

    service manual

    I had a service/repaire manual sent to me from a rep see if this is what you need
    Sevice manual for a 1000

  10. #10
    Registered
    Join Date
    Mar 2005
    Posts
    339
    Hi Greg,

    THANK YOU. This is a huge help. I am getting closer and closer to it. Still, any other piece of information will be highly appreciated.

    Thank you.

    Zoltan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •