[dcutler35]

I am trying to make a macro that will basically make a t nut of different sizes to use within gibbs cam the t nut may be as long as 70 inches or .875 it may be as tall as 5 inches or as tall as 1.0 inch the thin part of the tnut may be
.750 or 5 inches my question is when using a macros in gibbs camm is it the same as a fanuc custom b macros ? any help will be greatly appreciated

[garywarlow]

I am trying to make a macro that will basically make a t nut of different sizes to use within gibbs cam the t nut may be as long as 70 inches or .875 it may be as tall as 5 inches or as tall as 1.0 inch the thin part of the tnut may be
.750 or 5 inches my question is when using a macros in gibbs camm is it the same as a fanuc custom b macros ? any help will be greatly appreciated

Gibbs cam is nothing like Fanuc macro B programming, it is all wrote in their own custom language.
i do write Gibbs Cam custom macros and teach it contact me if you need to know more

[garywarlow]

Gibbs Cam Macros is nothing like Fanuc custom B macros, it is wrote in there own custom language, i do write and teach Gibbs macros if you need further help