[routerbob101]

Good Day
I'm looking for 5 axis CAM software that can tool path solid/surface models with undercuts and organic shaped surfaces. Think a chess pawn shape with frills. Currently I am using Master Cam X6 and this type of object is a programing challenge. What software should I investigate further.
Thanks for any input.
Bob

[txcncman]

Sounds almost like you are wanting one-click programming. I do not think you will find any software easier than any other. They are just different.

[routerbob101]

Hello
No I am not expecting nor am I looking for a 1 button solution. Currently I am using MasterCAM X6 and it meets most of my needs. However MC does have problems with undercuts. Delcam's PowerMill looks like it does a much better job with organic sculpturistic shapes. if you have some experience to share that would be good
Bob

[Richard5X]

I'm confident you'll be surprised at what directMILL 5X can do in 5-axis. Please email me the part and we'll take you through it (or request a 30-day evaluation if you'd prefer).