Hi guys
A friend of mine has just bought a Milltronics VM24 with Yaskawa GPD515 spindle drive, not sure of the control version. I`ve got the machine up and running, but the spindle speed is out to the commanded speed, ie 500rpm commanded is 300rpm on the feeback and actual speed. I`ve just got hold of a drive manual from yaskawa, but need to know where to adjust the analogue output for the command value to the drive, is it a parameter or do i need to tweak a pot in the cnc box ? Any help would be appreciated.
I haven`t got the electrical schematics by the way, but to have the operator manual.