Is there a parameter to change the way our TM2 rapids? I want it to finish a 3 axis rapid at the same time instead of shortest path, if its even possible on a HAAS. Also, offset for tools are only showing a total of 6, with a slew of fixture offsets.
Results 1 to 3 of 3
-
06-22-2012, 06:17 PM #1
Gold Member
- Join Date
- Feb 2009
- Posts
- 6028
Haas rapid parameter, and offset param?
-
06-22-2012, 09:11 PM #2
Registered
- Join Date
- Apr 2005
- Posts
- 713
Do you know what RTFM means?
Setting 90: Max tools to display on offset screen
Parameter 315: Set to 0 for dog leg rapids, set to 1 for interpolated rapids (what you want). Be forewarned, this is a much slower way to do rapid movements if the movements are large.
It's all in the manual.
-
06-23-2012, 12:42 AM #3
Gold Member
- Join Date
- Feb 2009
- Posts
- 6028
Thanks, and yes I went through the manual. Didn't find much on parameters there. In fact the manual didn't even cover the network set up at all. I'm thinking we may have been shorted some docs with this machine.
Reply With QuoteSimilar Threads
-
Rapid to (# set by Parameter) What's yours?
By Scott_bob in forum G-Code ProgramingReplies: 9Last Post: 09-01-2021, 06:05 PM -
Rapid speed parameter M32
By MIKEL12 in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 10-08-2010, 10:41 PM -
Rapid on X Parameter - HAAS TL-1
By Bosarge66 in forum Haas LathesReplies: 0Last Post: 08-11-2010, 08:44 PM -
Rapid speed parameter in a ES-L6 with OSP U10L?
By aaroncswenson in forum OkumaReplies: 6Last Post: 05-17-2010, 03:24 PM -
Please help with feed/rapid override parameter
By Hermle UWF851 in forum FanucReplies: 2Last Post: 04-22-2009, 10:29 PM
Posting Permissions
