[stang073]

Hello everyone, i have a colchester triumph 2000 lathe and i was wondering what the value of it would be. Its in beautifull condition and works perfectly. I got it really cheap a few years ago and now need to free up some cash. Any replies on value or interest would be appreciated. Thanks

[Coxsteve]

Details as to what year etc as they made them from 1967 on and are still in production though in much modified form so the value will obviously vary greatly,600 machine Australia were the agents from memory so bare in mind if you ring tham they will give you a wholesale pricing and depending on year of manufacture staff may not have a clue if too young as it could be before they were born.

[stang073]

Its a 1996 model i have been told. I will have to give them guys a ring and see if they can give me some info. Cheers mate

[mactec54]

stang073

Some photos would get it sold really fast

[lsd0]

Australia is a big place Stang, where exactly is the lathe?

[stang073]

Mate the lathe is located in north west nsw. Anyone is welcome to have a look if they are interested