Working on rebuilding a F1 I'm ordering new motors there 175oz/in any thought on those, my controller died so I'm reworking it all, I'm going to use this thread as my rebuild thread
Sent from my ADR6350 using Tapatalk 2
Working on rebuilding a F1 I'm ordering new motors there 175oz/in any thought on those, my controller died so I'm reworking it all, I'm going to use this thread as my rebuild thread
Sent from my ADR6350 using Tapatalk 2
Before rebuild, when I got it, worked ok but controller wad degrading and the bearings acting up
Sent from my ADR6350 using Tapatalk 2
Current photos after taking unit completly down and cleaning, still waiting on new bearings and motors
Sent from my ADR6350 using Tapatalk 2
I rebuilt mine some years ago, fitting everything in the machine enclosure and discarding the controller cabinet - saves a lot of room! Not-very-good picture of the original arrangement attached. The stepper drivers shewn were home-build ones with a Bob Campbell breakout board fitted later. I fitted a balance weight to the head - the black thing on slides - to ease the task of the z-motor in rapid retracts.
Best Wishes
Rob. Brown
Attachment 217164