496,281 active members
6,248 visitors online
Register for free
Login
496,281 active members
Results 1 to 7 of 7
  1. #1
    Registered
    Join Date
    Jul 2012
    Posts
    0

    Gleason 125H Grear Hob Warning

    Hello,

    I am having some problems with a Gleason 125H Gear Hob. Can any one Advise as to what the following Warning code refers to?

    Warning 419: User File Error

    Any help would be appreciated

    Thanks

  2. #2
    Registered
    Join Date
    Mar 2006
    Posts
    2712
    Have you asked Gleason?

    Dick Z
    DZASTR

  3. #3
    Registered
    Join Date
    Jul 2012
    Posts
    0

    Gleason

    Quote Originally Posted by RICHARD ZASTROW View Post
    Have you asked Gleason?

    Dick Z
    Dick,

    Yes, I currently have a call into Gleason, I am awaiting their call. The machine is down and holding up production, so I am trying to use all of the resources that are at my disposal.

    Thanks,
    Alex Calverley

  4. #4
    Registered
    Join Date
    Mar 2006
    Posts
    2712
    How old is the machine? Gleason doesn't seem to want to service any machine over ten years old. They'd rather sell you a new one.

    Dick Z
    DZASTR

  5. #5
    Registered
    Join Date
    Jul 2012
    Posts
    0
    Ok, Problem solved, or at least pinpointed

    After long discussions with the service tech at Gleason, here is what we figured out...

    First Off, I have a Gleason Phoenix 125GH Gear Hob with Fanuc 15MA Controller, this is important, as this machine is friggin old

    This machine uses a single board computer to communicate between the Gleason computer and the Fanuc controllers

    The Warning "419: User File Error" is the controller telling the system that it cannot communicate with the Gleason computer. This was further realized because we could not initialize the Gleason screen. The gleason computer is above the Floppy Drive begind the metal plate.

    I was told this happens because of the following reasons...

    1) The A: drive (Floppy) is either not functioning or a small 2 Amp fuse in the unit has blown

    2) The CMOS battery in the Gleason Computer needs to be replaced

    3) There is a loose wire connection somewhere between the computer and the Fanuc Controllers

    Hope this helps some one somewhere get started.

    Thanks,
    Alex C.

  6. #6
    suhas1234
    Guest

    Re: Gleason 125H Grear Hob Warning

    Dear Simplyinsane11 I have same alarm on Gleason 125GH Gear Hob, your machine is running now?

  7. #7
    suhas1234
    Guest

    Re: Gleason 125H Grear Hob Warning

    Dear Simplyinsane11 I have same alarm on Gleason 125GH Gear Hob, your machine is running now?
    1.Check all fuse are ok.
    2.No any battery for Gleason computer.
    3.No any loose connection found.

    So please guide me.
    Regards,
    Suhas.

Similar Threads

  1. Replies: 8
    Last Post: 05-07-2015, 10:04 AM
  2. M&M Gleason Precision System Gear Measuring Machine with Windows Xp SP1
    By M.RISHIKESH in forum Operating System software
    Replies: 0
    Last Post: 05-17-2013, 04:55 AM
  3. gear spiral gleason
    By massimo38 in forum Manual Machining Tooling
    Replies: 0
    Last Post: 03-27-2011, 11:22 AM
  4. Replies: 2
    Last Post: 10-16-2009, 01:22 PM
  5. Replies: 0
    Last Post: 04-22-2008, 03:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •