[jrmach]

Strange things are happening when dimensioning.Especially when doing angles and radiuses.The screen freezes up for a while,then goes blank for a while,just short of crashing all the way,then it comes out of it and works.Then everything works fine after it does this routine the first time.This has been happening since day one ,I just have not mentioned it.It is becoming irritating now.So it does work,but takes a long time for first dimension and something is not right here.Never a problem in 23,though.

[dwood]

i had this pause, but checked on new update seems to fix this, so far

[jrmach]

You sure??Nothing changed here.Whatever is going on is not good and annoying,ha.

[dwood]

spoke to soon went and opened some other drawings and it slowed down again, not to the point of stopping, but irritating
the first time i measure it is slow after that is ok, could it be the font

[jrmach]

The first time I measure it crashes,then its ok after that.Takes about 15 seconds to run its"OCC"routine.It is irritating.

[dwood]

switch your font to arial black and if you open a file from other versions
make sure dimensions are set the same , see if this helps

edit
making sure the font is set the same has improved, if not fixed mine

[jrmach]

That "fixes"it.At least if you use that font.Hope there are others that well work.Wonder what the heck??Good job DWOOD:banana::banana::banana:

[dwood]

stumble on to one every once in a while,
may be the way windows 7 handles fonts, it's a bleep computer :drowning:

[jrmach]

stumble on to one every once in a while,
may be the way windows 7 handles fonts, it's a bleep computer :drowning:

Ha,don't know,don't care,just want it to work Dammitt!!he,he